MZ Skin LED 2.0 LIGHTMAX SUPERCHARGED LED MASK
40 080 uah
Details
Taking at-home devices to the next level of luxe, the LightMAX Supercharged LED Mask 2.0 is a flexible, portable, home-use mask that uses light emitting diodes (LED) to submerge the skin in light. The LED Mask delivers a duo of light options, Red + Infrared or Blue + Red, to promote total skin rejuvenation. LED therapy can help solve a plethora of skin concerns such as plumping and firming the skin, calming inflammation, diminishing breakouts and reducing hyper-pigmentation.
ANTI-AGEING LED MODE: RED & INFRARED
- Stimulates collagen to firm & plump the skin
- Boosts luminosity through improved circulation
- Soothes damaged skin, reduces sensitivity & calms inflammation
- Helps skin absorb products more effectively
ACNE LED MODE: RED & BLUE
+ Anti-bacterial properties decongest & clarify skin.
+ Balances a troubled complexion caused by p. acnes microbes.
+ Stimulates collagen production to strengthen skin.
+ Boosts luminosity through improved circulation
ANTI-AGEING LED MODE: RED & INFRARED
- Stimulates collagen to firm & plump the skin
- Boosts luminosity through improved circulation
- Soothes damaged skin, reduces sensitivity & calms inflammation
- Helps skin absorb products more effectively
ACNE LED MODE: RED & BLUE
+ Anti-bacterial properties decongest & clarify skin.
+ Balances a troubled complexion caused by p. acnes microbes.
+ Stimulates collagen production to strengthen skin.
+ Boosts luminosity through improved circulation
- Vendor code: MZ-210927
Mode of application
1. FULLY CHARGE THE LED MASK
The LED uses a controller which contains a lithium-ion polymer battery. Before you begin, fully charge the MZ Skin LED Mask by inserting the USB-C cable into the controller, then insert the power supply into a suitable electrical outlet (via a 2 or 3 pin plug).
The 3 LEDs in the controller will start to flash to indicate charging. The battery is fully charged when the three indicator LEDs on the controller stay illuminated.
Please note, the MZ Skin LightMAX Supercharged LED Mask 2.0 cannot be operated while charging.
2. MASK SET UP
An adjustable Velcro strap connects behind the head and allows you to comfortably wear the mask. To fit the mask, thread the straps through the inlet holes on either side of the mask. Loop the straps around your head and secure firmly. Adjust if necessary.
3. THE CONTROLLER
The mask is connected to the controller by a USB-A connector. The controller switches the LEDs ON and OFF and fully controls power to the mask. The controller has two activation buttons that allow you to choose between the acne treatment mode and the wrinkle treatment mode. A 10-minute countdown timer will indicate the remaining time left for each treatment. The controller uses a visible display comprising of 3 micro-LEDs to show the user the battery charge status of the device.
4. TREATMENTS
1. Cleanse and exfoliate the skin to remove any traces of make-up and SPF
2. Place your mask on the face, secure with the two Velcro straps
3. Connect the mask to the controller
4. Select the treatment mode you require. Switch on the controller by pressing and holding the treatment selector ON/OFF button. The device will switch ON.
5. The device switches off after ten-minutes. You may stop the treatment at any time by pressing the ON/OFF button on the controller.
6. Remove the mask, apply your preferred skincare regime.
7. Clean the mask with a water-based wipe or damp, clean cloth. Stubborn stains can be removed by wiping gently with 70% alcohol.
Ensure that the device is NOT being charged when cleaning.
The LED uses a controller which contains a lithium-ion polymer battery. Before you begin, fully charge the MZ Skin LED Mask by inserting the USB-C cable into the controller, then insert the power supply into a suitable electrical outlet (via a 2 or 3 pin plug).
The 3 LEDs in the controller will start to flash to indicate charging. The battery is fully charged when the three indicator LEDs on the controller stay illuminated.
Please note, the MZ Skin LightMAX Supercharged LED Mask 2.0 cannot be operated while charging.
2. MASK SET UP
An adjustable Velcro strap connects behind the head and allows you to comfortably wear the mask. To fit the mask, thread the straps through the inlet holes on either side of the mask. Loop the straps around your head and secure firmly. Adjust if necessary.
3. THE CONTROLLER
The mask is connected to the controller by a USB-A connector. The controller switches the LEDs ON and OFF and fully controls power to the mask. The controller has two activation buttons that allow you to choose between the acne treatment mode and the wrinkle treatment mode. A 10-minute countdown timer will indicate the remaining time left for each treatment. The controller uses a visible display comprising of 3 micro-LEDs to show the user the battery charge status of the device.
4. TREATMENTS
1. Cleanse and exfoliate the skin to remove any traces of make-up and SPF
2. Place your mask on the face, secure with the two Velcro straps
3. Connect the mask to the controller
4. Select the treatment mode you require. Switch on the controller by pressing and holding the treatment selector ON/OFF button. The device will switch ON.
5. The device switches off after ten-minutes. You may stop the treatment at any time by pressing the ON/OFF button on the controller.
6. Remove the mask, apply your preferred skincare regime.
7. Clean the mask with a water-based wipe or damp, clean cloth. Stubborn stains can be removed by wiping gently with 70% alcohol.
Ensure that the device is NOT being charged when cleaning.
Shipping & Returns
We offer the following delivery methods:
• Express courier delivery in Kiev and the suburban area remoteness of 20 km.
• Delivery in Ukraine by courier services.
• Pickup from the Sanahunt Luxury Department Store.
Ask a Question
If you have any questions, you can contact us.
You may also like
